Canon imageRUNNER C5051 ADVANCE Maintenance Manual page 41

5
Remove the seal holding the staples together, by pulling it straight out .
If you pull it out at an angle, it may tear. Make sure that you pull the seal straight out.
6
Gently push the staple case into the finisher until it is securely in place .
7
Close the front cover of the finisher .
When closing the front cover of the finisher, be careful not to get your fingers caught, as this may result in personal
injury .
After the cover is closed, the stapler unit may automatically perform a "dry" stapling operation to reposition the staples.
1-29
Inner Finisher-A1 (Optional)
1