Land Pride AFM4016 Operator's Manual page 45

All flex grooming mowers
Hide thumbs Also See for AFM4016:
Table of Contents

Advertisement

Land Pride
Section 7: Features & Benefits
Features
Low pivot points on deck
Narrow 6'8" transport width
Gearbox HP Rating
8" Deck overlap
Automatic wing locks
1/4" Gauge wheel arms
Sleek frame design
Rear discharge
Blade rotation
18" Deck tires with sealant
23" Transport tires with
tapered bearings
18,340 fpm Blade tip speed
Cat. 4 CV main driveline
Mulching blades
Cat. 2 slip-clutch wing
drivelines
Easy belt tension release
Easy to grease blade spindles
Gearbox Warranty
7/28/06
Table of Contents
AFM4016 All-Flex Grooming Mower
The lower the pivot points are to the ground, the more side to side swing, allowing for
excellent flotation from each deck.
Not much wider than most tractors, making for safer transport. Meets most city/county
codes for transport width.
40 - 70 HP
Eliminates skipping when going into a tight turn.
When wings are raised in the full transport position, the wings lock in place, no need to get
off the tractor to lock.
1/4" Sidewall thickness on gauge wheel arms means a great deal of 'hidden' strength.
Single beam hitch design allows for a zero turning radius.
Even dispersal, discharged items are always aimed downward. No rear chains are
needed, which tend to clump damp grass.
Counter rotation; Wing decks throw grass away from the path of the rear deck. Rear deck
doesn't get covered up nor does it get bogged down by cut grass.
18" Tires offer great flotation, less lbs. per square inch. Sealant minimizes flats.
23" Transport tires offer smooth roading. Tapered bearings offer longevity.
High blade tip speed for clean cut and efficient discharge.
Constant velocity main driveline allows for tighter turns without harming U-joints in
driveline.
Mulching blades are available.
Reduces start-up torque that is put on the driveline, gearbox and gearbox support.
Easily release belt tension for changing belt or for winter storage.
No guards to remove for routine greasing of blade spindles.
S/N 368188- one year on all gearbox components.
S/N 368188+ 5 years on gearbox housing, gears and shafts,
3 years on bearings and seals in gearbox.
AFM4011, AFM4014 and AFM4016 All Flex Grooming Mowers 315-160M
Benefits
43

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Afm4011Afm4014

Table of Contents