V-Belt Installation - Land Pride AFM4016 Operator's Manual

Section 5: Maintenance and Lubrication

V-Belt Installation

!
CAUTION!
Belt drive system under spring tension; use care to avoid bodily
harm!
Refer to Figure 4-8 & Figure 4-9:
These illustrations are also on the labels located on the
top of the mower decks.
1. Remove the right hand and the left hand belt covers.
2. Disengage belt tensioning latch by turning release
nut with a 3/4" wrench. See Figure 4-8 and Figure 4-
9 for location of release nut.
Blades Rotation: CW / Center Blade Bolt: R.H Threads
Top View of Left Hand Deck Belt Drive
Blades Rotation: CCW / Center Blade Bolt: L.H Threads
Top View of Center and Right Deck Belt Drive
Models 4011 Shown
Belt Placement
Figure 4-8
26 AFM4011, AFM4014 and AFM4016 All Flex Grooming Mowers 315-160M
Table of Contents
3. Replace old belt with a new Land Pride belt making
sure the new belt is positioned correctly in all the
pulley grooves.
4. Engage belt tensioning latch by turning the release
nut with a 3/4" wrench.
5. Check for correct belt tension. Refer to Belt Tension
in the "Adjustments" section on page 46.
6. Reinstall all belt covers and secure with hardware.
12697
Blades Rotation: CW / Center Blade Bolt: R.H Threads
12698
Blades Rotation: CCW / Center Blade Bolt: L.H Threads
Top View of Center and Right Deck Belt Drive
Top View of Left Hand Deck Belt Drive
Models 4014 & 4016 Shown
Belt Placement
Figure 4-9
Land Pride
13662
13661
7/28/06