Installing The Helix Dsp Pc-Tool Software - HELIX PP50DSP Operating Instructions Manual

Installing the HELIX DSP PC-Tool software

In order to use the HELIX DSP PC-Tool software you must first install it on your PC according to
the following instructions:
• Important: Ensure that the processor and/or USB interface are not yet connected to your
computer. Only connect the processor and/or USB interface once the software has been suc-
cessfully installed on the computer!
• Download the compressed zip-file "HELIX DSP PC-Tool.zip" from the Audiotec Fischer website
(www.audiotec-fischer.de) The file can be found under the "PC-Tool" tab.
• This zip-file contains a folder called "HELIX DSP PC-Tool"
• Unpack the entire folder and save it on your hard driveImportant: This folder must not be sa-
ved to any portable data storage media (e.g. USB stick), but stored on the hard drive.
• If the folder has been successfully unpacked and saved, you will find it contains the following
files, among others:
4