Channel Selection; Linking Channels - HELIX PP50DSP Operating Instructions Manual

Channel selection

Selecting channels for adjustment:
Select the channel you want to adjust. To do so, simply click on the respective box with the left
mouse button. The active channel is indicated by the red LED (top front left in the example).
The software allows each channel to be adjusted separately. In spite of this, it often makes sense

Linking channels:

to link the two front channels, or the two rear channels, for example, and therefore adjust them
simultaneously. This is particularly recommended for the high- and low-pass filters since having
different values for the right and left channels should be avoided. Even with the equalizer, a sepa-
rate adjustment of channels only makes sense if sound optimization is only required for a single
listening position. Simply insert a tick by the channels you want to adjust simultaneously (in the
example above, the two front channels)
Important information:
When linking two channels, the adjustments made previously to one channel are not automatically
transferred to the other channel. Only those adjustments made after the link has been created are
then applied in an identical manner to the linked channels. Therefore, please consider whether two
or more channels should be adjusted simultaneously before making any adjustments.
12