Naming Outputs; Default Settings Of The Individual Channel Types - HELIX PP50DSP Operating Instructions Manual

Naming outputs:

Just as with the inputs, you are also able to allocate names to the outputs "A-H"
on the right hand side of the input mask. They are selected using the right or left
mouse button.
In this case, however, the selected configuration does immediately affect the
default settings of the high-pass and low-pass filters in the DSP main menu. This
therefore prevents, for example, a tweeter connected to output A accidentally
being assigned a broad band signal which may damage it. Any unused output
channels should ideally be muted ("Not_used"):
Default settings of individual channel types:
Output channels
Not used
Front L Fullrange
Front L Tweeter
Front L Midrange
Front L Woofer
Front R Fullrange
Front R Tweeter
Front R Midrange
Front R Woofer
Center Fullrange
Center Tweeter
Center Woofer
Rear L Fullrange
Rear L Tweeter
Rear L Midrange
Rear L Woofer
Rear R Fullrange
Rear R Tweeter
Rear R Midrange
Rear R Woofer
Rear Fill
Subwoofer 1
Subwoofer 2
14
Default high-pass
Channel output muted
-
3000 Hz, 12 dB, Butterworth
500 Hz, 12 dB, Butterworth
-
-
3000 Hz, 12 dB, Butterworth
500 Hz, 12 dB, Butterworth
-
200 Hz, 12 dB, Butterworth
3000 Hz, 12 dB, Butterworth
-
-
3000 Hz, 12 dB, Butterworth
500 Hz, 12 dB, Butterworth
-
-
3000 Hz, 12 dB, Butterworth
500 Hz, 12 dB, Butterworth
-
200 Hz, 12 dB, Butterworth
-
-
Default low-pass
-
-
3000 Hz, 12 dB, Butterworth
3000 Hz, 12 dB, Butterworth
-
-
3000 Hz, 12 dB, Butterworth
3000 Hz, 12 dB, Butterworth
-
-
3000 Hz, 12 dB, Butterworth
-
-
3000 Hz, 12 dB, Butterworth
3000 Hz, 12 dB, Butterworth
-
-
3000 Hz, 12 dB, Butterworth
3000 Hz, 12 dB, Butterworth
-
80 Hz. 24 dB, Butterworth
80 Hz. 24 dB, Butterworth