Channel Routing - Configuring Inputs And Outputs; Naming Inputs - HELIX PP50DSP Operating Instructions Manual

Channel routing - configuring inputs and outputs

The C-DSP/P-DSP allows input channels to be freely allocated to the output channels. To perform
this allocation, click on the "Configure Inputs/Outputs" box in the DSP PC-Tool main menu once
the software starts.
This will then present you with the following input mask:

Naming inputs:

On the left hand side of this mask you can allocate a name to each of the input channels (C-DSP:
"A-H" and P-DSP: "A-F) to give you the best possible overview. Make the transfer using the right
and left mouse buttons.
The following names may be allocated to the input channels:
•
•
•
•
•
•
•
•
•
Please note:
This setting does not affect the functionality. It is merely used as an overview
and helps you to better differentiate between the channels.
Not used (input is muted)
Front L Fullrange
Front L Tweeter
Front L Midrange
Front L Woofer
Front R Fullrange
Front R Tweeter
Front R Midrange
Front R Midwoofer
• Rear L Fullrange
• Rear L Tweeter
• Rear L Midwoofer
• Rear R Fullrange
• Rear R Tweeter
• Rear R Midwoofer
• Center Full
• Center Tweeter
• Center Midwoofer
• Subwoofer
13