Table of Contents
Advertisement
Section 6: Features and Benefits
Section 6:
Features and Benefits
RCB6010 & RCB6015 Bid Specification Rotary Cutters
Features
250 HP Splitter box
210 HP wing boxes
Tractor HP range
Left wing counter rotates
Factory assembled
Gearbox warranty
2 3/8" Gearbox output shaft
Star profile Cat. 5 drivelines
Input driveline
Wing drivelines
540 or 1000 RPM
Dual swiveling clevis hitch
Gearbox seal protection
All-welded deck
3/16" Deck thickness
1/4" Sidewall thickness
10 1/2" Deck height
2" to 14" Cutting Height
6" Blade overlap
4" Cutting capacity
High blade tip speed
Chain guards
Replaceable skid shoes
3/16" Round stump jumper
with 1" thick plate
Underside deck rings
4 Plate slip-clutch
Easy to Grease drivelines
Hinged wing sections
1" Solid hinge rods
Wing hydraulics
Mechanical winch (optional)
Wing transport locks
Slow moving vehicle sign
Enclosed front to rear dual
leveling rods
Airplane tire option
with optional foam sealant
Laminated tires option
Replaceable wheel spindles
Wheels
Spring cushioned center-axle
Walking Tandem Axles Option
Rear axle pull ring
Surpassed rugged industry
standards
Paint options
36
RCB6010 & RCB6015 (540 RPM) and RCMB6010 & RCMB6015 (1000 RPM) Rotary Cutters 318-263M
Table of Contents
Highest gearbox rating in its class.
Highest gearbox rating in its class.
50 - 250 HP
Better discharge of material. (Refers to RCB6015 cutters with 2 wing decks.)
Arrives ready for the customer. Saves the customer set up time.
S/N 325492+ 5 years on housing, gears and shafts, 3 years on seals & bearings.
S/N 325491- 1 year warranty.
Large output shaft handles shock loads better.
Increased strength in driveline. Holds up to shock loads and harsh mowing conditions.
Cat. 5 constant velocity or conventional u-joint available.
Choice of Cat. 4 or Cat. 5 to match up to customers needs.
Fits wide variety of tractors.
Clevis hitch bolts to tractor draw bar and swivels left to right and front to back. This allows
cutter to float but hitch stays rigid on drawbar, which eliminates drawbar wear.
Gearbox bottom seal is protected for longer bearing life.
Deck is 100% welded which offers additional strength and keeps moisture and dirt from
getting trapped in tight places, which hastens rust over time.
Heavy gauge material aids in resisting damage from debris hitting the underside of the deck.
Reduces debris piercing possibilities.
Handles heavy cutting, which reduces balling up of cut material under the deck.
Cover a wide range of cutting conditions.
Eliminates skipping during turns.
Enables the cutter to be used in pastures with small trees up to 4" in diameter.
(540 rpm = 15,268 fpm center & 15,000 fpm wings)
(1000 rpm = 15,578 fpm center & 14,620 fpm wings)
Allows clean cutting of material.
Front and rear double chain guards are available with cable to reduce thrown objects.
Can be replaced when damaged or worn out on wings and center deck.
1" Thick plate offers superior support and protection to gearbox output shaft.
Fully welded 1/2 " x 3" dec k rings on underside of each deck eliminates blades getting in
deck, and offers additional overall strength to the decks.
Protects drivelines and gearboxes by slipping clutches rather than twisting the driveline
when impacts are encountered.
Drivelines have access holes to grease the U-joints of the driveline, as well as holes to
grease the inner profiles.
Allow you to shape the cutter to the job. Ideal for rough ground where hillsides, ditches and
hollows can cause uneven cutting.
Larger diameter hinge rod gives greater strength to the cutter from front to rear, and in the
hinge area itself.
Wing hydraulics are plumbed independently to allow the user to raise one wing at a time,
which can aid in going through narrow spaces.
Mechanical winch aids in folding the cutter in the event of hydraulic failure.
Transport wing locks securely hold wings in the folded position in case of hydraulic failure.
Standard equipment to make operating conditions safer.
Dual leveling rods enable the cutter to pull equally on the rear axle during uneven terrain
vs. just pulling from one side of the front hitch.
Airplane tires give better cushion while transporting the cutter. Available with heavy-duty
foam which virtually eliminates flats.
Can't go flat.
Wheel spindles can be replaced easily by removing two bolts vs. replacing the entire axle.
6 or 8 Wheel option.
Protects unit from bumps and ground shock.
Better flotation over rough terrain.
Aids in getting unit out of soft ground conditions.
All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing
procedures specified by ANSI.
Choice of red, green or tan to match popular tractor lines.
Benefits
Land Pride
9/04/08
Advertisement
Table of Contents
