Download Print this page
Land Pride 315-722A Assembly Instructions Manual
Land Pride 315-722A Assembly Instructions Manual

Land Pride 315-722A Assembly Instructions Manual

Hydraulic wing unlock for afm4211, afm4214, afm4216, & afm4522

Advertisement

Quick Links

AFM Hydraulic Wing Unlock
Assembly Instructions
For AFM4211, AFM4214, AFM4216, & AFM4522
Before You Start
When you see this symbol, the subsequent
!
instructions and warnings are serious - follow
without exception. Your life and the lives of others
depend on it!
Before you begin, read these instructions and check to be
sure all parts are accounted for. Please retain these
installation instructions for future reference and parts
ordering information.
The 315-722A Hydraulic Wing Unlock Kit is exclusively
designed for Land Pride's All-Flex Mower Models
AFM4214, and AFM4216.
The 315-736A Hydraulic wing Unlock Kit is exclusively
designed for Land Pride's All Flex Mower Model
AFM4522. This Kit will require the tractor to have a
second duplex outlet for the hydraulic hoses.
Please read these installation instructions and your All-
Flex Mower Operator's Manual thoroughly before
beginning. Especially read information relating to safety
concerns.
A separate Parts Manual for replacement parts can be
purchased from your nearest Land Pride dealer or
downloaded free of charge from our web site at
www.landpride.com. Have model and serial numbers
handy when placing an order.
Manual Part Numbers:
AFM4211
• Operator's Manual . . . . . . . . . . . . . . . . 315-507M
• Parts Manual . . . . . . . . . . . . . . . . . . . . . 315-507P
AFM4214
• Operator's Manual . . . . . . . . . . . . . . . . 315-587M
• Parts Manual . . . . . . . . . . . . . . . . . . . . . 315-627P
AFM4216
• Operator's Manual . . . . . . . . . . . . . . . . 315-587M
• Parts Manual . . . . . . . . . . . . . . . . . . . . . 315-587P
AFM4522
• Operator's Manual . . . . . . . . . . . . . . . . 315-360M
• Parts Manual . . . . . . . . . . . . . . . . . . . . . 315-360P
General Information
These assembly instructions apply to the Hydraulic Wing
Unlock Kits listed below:
315-732A AFM4211 HYDRAULIC WING UNLOCK KIT
315-722A AFM4214, & AFM4216
HYDRAULIC WING UNLOCK KIT
315-736A
AFM4522 HYDRAULIC WING UNLOCK KIT
© Copyright 2019
Printed
2/01/19
Manual No. 315-731M
Tools required:
Safety glasses
Work gloves
Pencil
Tape Measure
Side diagonal cutters
Center punch
Hammer
Electric drill with 13/32" drill bit
Extension cord (if required)
Set of box end or open end wrenches
Spray bottle with soapy water
Further Assistance
Your dealer wants you to be satisfied with your new
Hydraulic Wing Unlock Kit. If for any reason you do not
understand any part of this manual or are not satisfied
with the service received, the following actions are
suggested:
1.
Discuss the matter with your dealership service
manager making sure that person is aware of any
problems you may have and has had the opportunity
to assist you.
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem, and request assistance.
3. For further assistance write to:
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
lpservicedept@landpride.com
Assembly Instructions
Assembly Instructions
A detailed listing of parts for the accessory kit is provided
on page 7. Use the list as a checklist to inventory parts
received. Please contact your local Land Pride dealer for
any missing hardware.
Initial Preparations
The steps listed below must be followed before installing
this kit:
1.
Park the All-Flex Mower on a flat surface, move gear
shift lever to neutral, set park brake, lower wings and
center deck until folding cylinders are fully extended.
2. Turn off engine and remove switch key.
1

Advertisement

loading

Summary of Contents for Land Pride 315-722A

  • Page 1 • Extension cord (if required) • Set of box end or open end wrenches The 315-722A Hydraulic Wing Unlock Kit is exclusively • designed for Land Pride’s All-Flex Mower Models Spray bottle with soapy water AFM4214, and AFM4216.
  • Page 2 Assembly Instructions Disassembly of Existing Parts Refer to Figure 1: Remove pull ropes (#2) from transport locks (#1) and discard. NOTE: Do not disconnect hydraulic hoses (#3) from straight adapter fittings (#4) when installing this kit on Model AFM4522 mower. AFM4211, AFM4214, &...
  • Page 3 Assembly Instructions 35480 Hydraulic Mount Assembly 35485 Figure 5 Attach Hydraulic Mount Assembly Models AFM4214 & AFM4216 Shown Hydraulic Mount Assembly Figure 6 Refer to Figure 5: Attach Hydraulic Mount Assembly Attach wire guide (#3) to hydraulic mount (#2) with 3/8"-16 x 1 1/4"...
  • Page 4 Assembly Instructions Assembly of Hydraulic Hoses 5. Adjust end of cable to be approximately 3 3/8" back from inside of loop as shown in Figure 7. Refer to Figure 8 on page 5: 6. Use cable clamp (#7A) closest to the spring to create Model AFM4211: a loop about 1 1/4"...
  • Page 5 Assembly Instructions NOTE: ITEMS (#19, #20, & #21) ARE USED WITH AFM4522 ONLY NOTE: ITEMS (#6A, #6B, #12, & #13) ARE USED WITH AFM4211, AFM4214, & AFM4216 ONLY NOTE: ITEM (#22) IS USED WITH AFM4211 ONLY 35471 Hydraulic Hoses & Aircraft Cable Assemblies (Model AFM4214 Shown) Figure 8 2/1/19 AFM Hydraulic Wing Unlock Assembly Instructions Manual No.
  • Page 6 Assembly Instructions Adjust Hydraulic Transport Locks Refer to Figure 9: With transport locking cylinder (#6) fully retracted, transport locks (#1) should be fully seated in tool bar locking lugs (#2) with slight slack in aircraft cables (#5). If needed, shorten or lengthen cables (#5) as follows: NOTE: Figure 9 is shown with mower decks down for clarity.
  • Page 7 Assembly Instructions This page left blank intentionally 2/1/19 AFM Hydraulic Wing Unlock Assembly Instructions Manual No. 315-731M...
  • Page 8: Part Description

    Parts Listing for AFM4211, AFM4214, & AFM4216 315-732A AFM4211 HYDRAULIC WING UNLOCK KIT ..Items #1, #2, & #3 315-722A AFM4214 & AFM4216 HYDRAULIC WING UNLOCK KIT ..Items #1 & #2 Item Part No.
  • Page 9 Parts Listing for AFM4522 315-736A AFM4522 HYDRAULIC WING UNLOCK KIT ... . (Items #1 & #2) Item Part No. Part Description 315-729L HYDRAULIC WING UNLOCK MOUNTING ASSEMBLY MOUNTING ASSEMBLY CONSIST OF THE FOLLOWING: 315-723H HYD WING UNLOCK MOUNT .
  • Page 10 Corporate Office: P.O. Box 5060 Salina, Kansas 67402-5060 USA www.landpride.com...

This manual is also suitable for:

315-736a