AQUOS LINK
AQUOS LINK connection
First connect the AQUOS LINK compatible audio system or an AQUOS BD Player that supports the HDMI CEC
protocol.
NOTE
• Refer to the operation manual of the device to be connected for further details.
• After unplugging connection cables or changing the connection pattern, fi rst turn on the power of the TV with all relevant
device's power turned on. Change the external input source by pressing TV/VIDEO, select the appropriate input source and
verify the audiovisual output.
• The cables illustrated in the following explanation are commercially available items.
Connecting an AQUOS BD Player via the AQUOS
LINK compatible audio system
HDMI-certifi ed cable (commercially
available)
HDMI-certifi ed cable
(commercially available)
AQUOS BD Player
AQUOS LINK Setup
AQUOS LINK Auto power on
If this is activated, the One Touch Play function is enabled.
While the TV is in standby mode, it automatically turns on
and plays back the image from the HDMI source.
Press MENU and the MENU screen displays.
1
Press c / d to select "Option".
2
Press a / b to select "AQUOS LINK Setup",
3
and then press ENTER.
50
Optical fi bre cable
(commercially available)
AQUOS LINK compatible
audio system
Connecting an AQUOS BD Player only
HDMI-certifi ed cable
(commercially available)
Press a / b to select "Auto Power On", and
4
then press ENTER.
Auto Power On
Selecting Recorder
Press c / d to select "On", and then press
5
ENTER.
Press MENU to exit.
6
NOTE
• The factory default for this item is "Off".
AQUOS BD Player
On
Off