La Crosse Technology WS-7107U Instruction Manual page 18

3.
Reattach the remote temp/humidity
sensor to the mounting bracket.
B.
THE WEATHER STATION
1.
The indoor weather station comes
with the table stand already mounted.
If you wish to use the table-stand, all
that is required is to place the indoor
weather station in your desired
location.
2.
To wall mount:
a)
Remove the table stand by pulling
down on the stand from the rear and
rotating forward.
b)
Fix a screw (not included) into the
desired wall.
c)
Place the indoor weather station
onto the screw using the hanging
hole on the backside.
d)
Gently pull the indoor weather
station down to lock the indoor
weather station into place.
18