Toshiba E-studio 1105 Operating Instructions Manual page 61

1. Perfect binder upper left cover
Open to clear a paper jam.
2. Perfect binder interposer
Load the cover sheets here. For details about how to load cover sheets, see "Loading Cover Sheets into the
Perfect Binder Interposer".
3. Perfect binder interposer unit
Open to clear a paper jam.
4. Glue container
Contains the glue used for perfect binding.
For details about how to fill this container, see "Filling the Glue Container".
5. Perfect binder interposer cover
Open to clear a paper jam.
6. Glue temperature adjustment key
Press this to adjust the glue temperature. The indicator shows the status of the glue temperature:
Lit: heating is finished and you can begin binding
Unlit: the glue will be fully heated in about six and a half minutes at the most
Flashing: the glue is being heated
7. Bridge unit front cover
Open to clear a paper jam.
8. Earth leakage breaker
Protects users from electric shock. For details about checking the earth leakage breaker, see "Checking the Earth
Leakage Breaker".
9. Waste paper receptacle
Collects the waste created by perfect binding. For details about how to remove the paper waste, see "Removing
Waste Paper", Troubleshooting.
Guide to Components
BQX032S
2
59