Engine Stop Button (Tc); Clutch Control; Rear Brake Control - Husqvarna TC - TE 449 2013 I.E. Manual

ENGINE STOP BUTTON (TC)

Engine stop push-button (1) is located on handlebar left-
hand side. Press it to cut the engine electric supply circuit,
switching it off.
CAUTION*:
Do not inadvertently press push-button
(1) when riding the vehicle.
1
SPECIFICATIONS - OPERATION - MAINTENANCE
EN - 18

CLUTCH CONTROL

The hydraulic clutch control lever (1) is located on the left-
hand side of the handlebar and is protected against dirt.
The position of the clutch control on handlebar can be
adjusted by loosening the retaining screws (A).
CAUTION*
Do not forget to tighten the screws after
the adjustment.
TE
1
TC-TXC
1

REAR BRAKE CONTROL

The rear brake control (1) is placed on the right-hand
side of the motorcycle.
TE:
A stop switch, during the braking action, causes the stop
light on the tail light to come on.
A
A
1