Downloading Routes - Mercedes-Benz S-Class Coupe 2015 Operator's Manual

Features
310
Press the Yes Yes
X
sage.
When the Vehicle Diagnostics Vehicle Diagnostics
X
Please Start Ignition Please Start Ignition
appears: turn the SmartKey to position 2 in
the ignition lock (
If the Please follow the instruc‐ Please follow the instruc‐
X
tions received by phone and move tions received by phone and move
your vehicle to a safe position. your vehicle to a safe position.
message appears: please follow the
instructions received by phone and move
your vehicle to a safe position.
The message in the display disappears.
The vehicle operating state check begins.
During this procedure, you will see the
Vehicle Vehicle Diagnostics Diagnostics Active
If you select
Check is canceled completely.
When the check is complete, the
vehicle diagnostics data. (Voice vehicle diagnostics data. (Voice
connection may be interrupted dur‐ connection may be interrupted dur‐
ing data ing data transfer) transfer)
vehicle data can now be sent.
Press the OK OK
X
sage.
The voice connection with the Customer
Assistance Center is terminated.
The Vehicle Diagnostics: Transfer‐ Vehicle Diagnostics: Transfer‐
ring Data... ring Data...
The vehicle data is sent to the Customer
Assistance Center.
Depending on what the customer service rep-
resentative agreed with you, the voice con-
nection is re-established after the transfer is
complete. If necessary, you will be contacted
at a later time by another means, e.g. by e-
mail or phone.
Another function of the Vehicle Health Check
is the transfer of service data to the Customer
Assistance Center. If a service is due, the dis-
play shows a message to this effect together
with information about any special offers at
your workshop.
This information can also be called up under
"Owners Online" at http://www.mbusa.com.
button to confirm the mes-
message
page 147).
Y
Active message.
Cancel, the Vehicle Health Cancel
Sending Sending
message appears. The
button to confirm the mes-
message appears.
Information on the data stored in the vehicle
( page 27).
Y
Information on Roadside Assistance
( page 23).
Y

Downloading routes

Downloading routes allows you to transfer
and save predefined routes in the navigation
system.
A route can be prepared and sent by either a
customer service representative or under
"Owners Online" at http://www.mbusa.com.
Each route can include up to four way points.
Once a route has been received by the navi-
gation system, you will see the
route "Route name" has been saved route "Route name" has been saved
under "Last destinations". Start under "Last destinations". Start
navigation? navigation? message on the COMAND dis-
play.
The route is saved.
To start route guidance: select
X
An overview of the route is shown in the
display.
If you select No No the saved route can be
called up later in the navigation menu.
Select Start Start.
X
Route guidance is started.
Downloaded and saved routes can be called
up again.
You can find further information in the sepa-
rate COMAND/Audio 20 operating instruc-
tions.
Speed alert
You can define the upper speed limit, which
must not be exceeded by the vehicle.
If this selected speed is exceeded by the vehi-
cle, a message will be sent to the Customer
Assistance Center. The Customer Assistance
Center then forwards this information to you.
You can select the way in which you receive
this information beforehand. Possible options
include text message, e-mail or an automated
call.
External External
Yes. Yes