Installing The Rear Brake - Yamaha YFM35FAS Supplementary Service Manual

REAR BRAKE
5.Measure:
Brake shoe lining thickness a
G
Out of specification → Replace.
1 Measuring points
NOTE:
Replace the brake shoes as a set if either is
worn to the wear limit.
Brake shoe lining thickness limit:
2.0 mm (0.08 in)
6.Measure:
Brake drum inside diameter a
G
Out of specification → Replace.
Brake drum inside diameter limit
(maximum):
161 mm (6.34 in)
7.Check:
Brake drum inner surface
G
Oil deposits → Clean.
Remove the oil with a rag soaked in lacquer
thinner or solvent.
Scratches → Repair.
Lightly and evenly polish the scratches with
an emery cloth.

INSTALLING THE REAR BRAKE

1.Lubricate:
Brake camshaft 1
G
Pivot pins 2
G
Lithium-soap-based grease
– 86 –
CHAS