Commonly Used Shortcuts; Troubleshooting - Samsung Digital Presenter Software User Manual

appendix

COmmONly uSED ShOrTCuTS

Shortcuts
F1
Description
50% View
Shortcuts
F7
Description
Still image

TrOuBlEShOOTINg

Problem
Program is running, but screen
remains black.
If the program does not start:
"Error in USB connection. Connect
the USB cable and try again."
Error Message
F2 F3
100% View Fit to window
F8 F9
Capture AVI Stop AVI
The video will not be displayed properly unless the presenter's output mode is set to
USB.
y OUTPUT MODE of the Presenter Main Menu must be set to USB. (SDP-760)
This is mainly because the digital presenter is not connected to the PC properly using
the USB cable.
y Ensure that the presenter is connected properly using the USB cable.
y Terminate all other graphic applications (occupying the USB or system resources in
large portion) that may affect the digital presenter program.
y Turn off the digital presenter and restart it after 10 seconds. Then, run the program
again.
This is because the digital presenter is not connected to the PC properly using the
USB cable.
y Check if the digital presenter turns off or if the USB cable is disconnected.
y Check if the USB cable connecting the device and computer.
y If too many application programs are running on your PC, the video transfer may
fail due to insufficient memory or resource.
y The USB 1.1 protocol is not supported by the digital presenter. Using the USB 1.1
port will fail to transfer the video. Use USB 2.0 port.
F4 F5
Stretch to
Full Screen
window
F10 F11
Turn the control Turn the toolbar
panel on/off on/off
Solution
F6
Quick save
F12
Save to
clipboard
_27
English