Download Print this page
La Crosse Technology World Time Center WS-7092U Operating Manual
La Crosse Technology World Time Center WS-7092U Operating Manual

La Crosse Technology World Time Center WS-7092U Operating Manual

World time center

Advertisement

Quick Links

World Time Center
Introduction
Congratulations on purchasing this state-of-the-art World Time Center as an example of superior design and
engineering. Providing radio controlled time, indoor temperature and humidity displays, outdoor temperature, this unit will
never keep you guessing on time, date or current and future weather conditions. Operation of this product is simple and
straightforward. By reading this operating manual, the user will however receive a better understanding of the WorldTime
Center together with the optimum benefit of all its features.
World Time Center
LCD1
LCD2
LCD3
WORLDTIME-Key
Features
World Time Center
4 digits showing Hour and Minute in the main display
WWVB time signal radio-controlled clock with manual time display
12/24 hour display
Time zone selectable
World time display with specific place represented by 3 sucessive characters
Calendar display
Display of weekday (8 languages to choose from)
Display of current indoor temperature
Display of current indoor relative humidity
Display of 8 Moon phases troughout the year
°C or °F temperature display selectable
LCD contrast changeable to 8 different tones
Low battery indicator
Wall Mounting
Getting started
Remove all parts from the packaging and place onto a table in front of you. Ensure that the following parts are included:
1.
World Time Center (main unit)
2.
Instruction manual
If any one of the above mentioned parts is missing please contact your supplier.
Please follow all further explanations and descriptions in this manual in order to ensure that your World Time
Center and Outdoor temperature sensor work correctly.
SET-Key
LANGUAGE-
Key
TIMEZONE-Key
Important Note:
For all users wanting to get additional informations on the function of the World Time Center there is an
alphabetically sorted subject index at the end of this manual offering a number of technical and functional
explanations. For use and operation of this product however the knowledge of this index is not necessary.
Putting into Operation
Basic Setup
Battery
Compartment
Hanging Hole
1.
Open the battery cover of the World Time Center and - checking the correct polarities –
insert 2 x AA, IEC LR6 1.5V batteries into the battery compartment as indicated above and replace the cover.
2.
Your World Time Center is now operational.
Reset
+ -Key
To reset the World Time Center. Wait for at least 30 seconds and repeat the setup procedure above.
Important!
After putting into operation (basic setup or reset) all key functions except for the "SET" and the "+" keys should
not be operated until the WWVB time signal has been received or the time is manually set.
Self Programming after Basic Setup or Reset (Putting into Operation)
After the the batteries are inserted (see "Putting into Operation") into World Time Center and a self programming
sequence will start which cannot be influenced by the user. At first all segments in the LCD will light up for appr. 3
seconds. Next, the unit will perform a battery test followed by the measurements of indoor temperature and humidity,
and a scanning of the WWVB time signals. After this starting phase the indoor temperature (Left on LCD 3) will be
displayed along with the displays "- - -" in the weekday, time (LCD 1), WWVB time (LCD 2) and indoor humidity sections
(Right on LCD 3). If measurements and signal receptions are successful, the dashes will be updated one by one by the
real values measured and received.
Initial Displays
If the "SET" key is pressed after "- - -" is displayed (as described in 7.1), but before the real measurements are
displayed, the learning mode will be terminated. Apart from the temperature already displayed on LCD 3 the following
initial displays will now be assigned to the various sections on the LCD:
Date (LCD 1)
Time of day (LCD 2)
If selected:
Worldtime location (LCD 1)
Worldtime (LCD 1)
Time zone (LCD 2)
Further default values:
Display modes
Time:
Temperature:
Language for weekday display:
LCD Contrast:
Note:
Battery Cover
"MON 1.1.99"
"12:00"
"- - -"
"12:00"
"EST"
12 hours
°F (degrees Fahrenheit)
GB (English)
Level 5

Advertisement

loading

Summary of Contents for La Crosse Technology World Time Center WS-7092U

  • Page 1 TIMEZONE-Key Features World Time Center • 4 digits showing Hour and Minute in the main display • WWVB time signal radio-controlled clock with manual time display • 12/24 hour display • Time zone selectable • World time display with specific place represented by 3 sucessive characters •...
  • Page 2 After completion of the self programming procedure check that all frequency signals are correctly received and displayed in the appropriate sections of the LCD screens. Should any one signal not be received, then see Items “WWVB Reception Check” below before performing a reset (see Reset above). LCD Screens The LCD of your World Time Center consists of three separate screens which provide - from top to bottom - the following information:...
  • Page 3 12/24 Hours Setting After entering the programming mode as described above the 12/24 hours display can be selected on LCD 2 in the following way: The “12h” or “24h” will start flashing (Default setting 12h). Select the desired time display mode by use of the “+”key.
  • Page 4 WWVB broadcasts are used by millions of people throughout the United States to synchronize electronic products like clocks, clock radios and wristwatches. WWVB continuously broadcasts time and frequenzy signals at 60kHz and the time information received and displayed is absolutely accurate regardless of summer or wintertime.
  • Page 5: Warranty Information

    La Crosse Technology, Ltd or La Crosse Technology, Ltd’s authorized service center. La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of La Crosse Technology, Ltd and must be returned to La Crosse Technology, Ltd.
  • Page 6 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND THIS DEVICE MUST ACCEPT INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. World Time Center Operating Manual Canada Mountain Time...