Care And Maintenance; Lists And Explanations Of Messages - Omron HCG-801 Instruction Manual

10. Care and Maintenance

10.1 Lists and Explanations of Messages

This section includes a list of all messages that may appear on the display. Refer
to these if you are not sure what a displayed message means.
Notice Messages
Message
Analysing.
Can not measure.
Please follow the instructions
for use.
Measurement was stopped.
Push START to begin
measurement again.
*1
Copied
*2
Erased
*1: Number of readings from 0 to 5. The number displayed represents the amount of copied ECG data.
*2: Number of readings from 1 to 300. The number displayed represents the amount of erased ECG
data.
The ECG data is being analysed.
A ECG wave-pattern could not
be detected.
The measurement was
interrupted or cancelled.
The indicated number of ECG
data has been copied to an SD
data into SD.
memory card.
The indicated number of ECG
data.
data has been erased.
Description Action
No action required. Wait until
analysis ends.
Check the instructions and
repeat measurement.
Press START to resume the
measurement.
No action required.
Wait until the message
disappears.
47