Overwrite - Omron HCG-801 Instruction Manual

8.9 Overwrite

The unit will overwrite the oldest stored reading when the SD memory card or unit
memory is full. A message will warn that this will happen, you can choose to hide
or display this message. (The default setting is to hide the message.)
The current setting is displayed at the
bottom of the screen.
1.
Press the
OK button to confirm your selection.
Caution!
While Hide is selected, the unit will overwrite (erase and replace) the oldest
measurement data with the results of the new measurement without displaying a
message, when the SD memory card or unit memory are full.
About the Overwrite message
If you select Display, the unit will display a message before
you take a measurement, asking if you want to overwrite
existing data with the new measurement data.
Select Yes to overwrite the oldest ECG data with the
results of the new measurement.
If you select No, measurement is cancelled.
button or button to highlight Display or Hide, then press the
8. Adjusting the Settings
39