Konica Minolta bizhub 754e Quick Manual page 99

3.2 Scan-to-Send function
Checking the cable connection
Check that a LAN cable is connected to the LAN port of this ma-
chine and the green LED is on.
Checking network settings of this machine
Tap [Utility], and select [Device Information].
Check that the IP address is displayed.
• For IPv4 environment
Tips
- In general, the default settings are available for network connection; however, some network environ-
ments require a change on network settings.
- If no IP address is displayed, you need to configure the network. Tap [Utility], and select [Administrator
Settings] - [Network Settings] - [TCP/IP Settings]. Configure the required settings to suit your environ-
ment. For details, refer to the User's Guide DVD.
bizhub 754e/654e
• For IPv6 environment
3
3-29