Bypass Tray; Applicable Paper Sizes - Konica Minolta bizhub 754e Quick Manual

2
2.8.4

Bypass Tray

Use the Bypass Tray when printing on a paper size other than for paper trays, or printing on envelopes or
transparencies.
To use the Bypass Tray, load paper and specify the paper type.
Applicable paper types
Plain paper, single-side-only paper, special paper, thick paper, postcard (4 e 6 (A6 Card)), transparency, let-
terhead, colored paper, envelope, label sheets, index paper, recycled paper, and banner paper

Applicable paper sizes

Type
Standard-size paper
Custom-size paper
How to load paper
1
Open the tray.
% To load large-sized paper, pull out the Tray Extension.
% To load banner paper, install the Mount Kit MK-715 for
banner paper.
NOTICE
Exercise care not to touch the surface of the Paper Feed Roll-
er with your hands.
2
After loading paper, adjust the Lateral Guide.
% Load paper into the tray with the print side facing down.
2-36
Size
12 e 18 w to 5-1/2 e 8-1/2 w/v, 4 e 6 w, SRA3 w, A3 w to A6 w, B4 w to
B6 w, A6 card w, 8 e 13 w, 16K w/v, 8K w, banner paper, envelope (B5 w
(6-15/16 inches e 9-13/16 inches (176 mm e 250 mm)), C4 w (9 inches e
12-3/4 inches (229 mm e 324 mm)), C5 w (6-3/8 inches e 9 inches (162 mm
e 229 mm)), C6 w (6-3/8 inches e 4-1/2 inches (162 mm e 114 mm)), DL w
(8-11/16 inches e 4-5/16 inches (220 mm e 110 mm)), Com10 (4-1/8 inches
e 9-1/2 inches (104.7 mm e 241.3 mm)), Monarch (3-7/8 inches e 7-1/2
inches (98.4 mm e 190.5 mm))
Paper width: 3-9/16 to 12-5/8 inches (90 mm to 320 mm)
Paper length: 5-1/2 to 47-1/4 inches (139.7 mm to 1,200 mm)
Loading Paper 2.8
bizhub 754e/654e