Having The Camera Memorize The Setting; Presetting Feature - Sony EVI-D100 Operating Instructions Manual

Having the Camera Memorize the
Setting

— Presetting feature

Up to six combinations of settings
(position, zooming, focusing and back
lighting) can be preset.
3
PRESET
2
1
Confirm that the STANDBY lamp
is not flashing.
If the STANDBY lamp is
flashing, press the PAN-TILT
REST button to reset the pan/tilt
position.
2
Adjust the position, the zooming,
the focusing, and the back lighting
of the camera. (See pages 43 and
45.)
3
While holding down the PRESET
button, press any of the
POSITION buttons, 1 – 6.
DATA SCREEN
STD REV
1 2
4 5
While
PRESET
holding
POSITION
down
46
Basic Operations
2
3
POSITION1~6
RESET
1
BACK LIGHT
Press a
3
POSITION
6
button on
RESET
which the
settings
are to be
preset.
Recalling the memorized
setting
Press any of the POSITION buttons
1 – 6 on which your settings have
been saved.
Canceling the preset memory
While holding down the RESET
button, press the POSITION button on
which the settings are to be canceled.
DATA SCREEN
STD REV
1 2
4 5
PRESET
POSITION
While
holding
down
Note
The memorized information is
retained until the power of the main
unit is turned off. To retain the
memory even if the power is turned
off, set the BACKUP switch, at the
rear of the camera, to ON. (See
"About Backup" on page 49.)
BACK LIGHT
Press the
3
POSITION
6
button on
RESET
which the
settings
are to be
canceled.