Malfunction Diagnosis; Setting The Camera Id - Sony HDC-750 Operation Manual

3
Rotate the MENU SEL control to align the "n"
marker with the number of the desired file (1
through 5), and push the MENU SEL control.
4
Push the MENU SEL control.
The current settings and those stored in the scene
file will be exchanged.
While the scene file is active, an asterisk (*) will
be displayed next to the scene file number.
5
To end menu operations, set the VF DISP switch to
ON.
The menu display will disappear from the
viewfinder screen, and the status of items set to
ON will be displayed on the screen.

4-5-10 Malfunction Diagnosis

The DIAGNOSIS page of the OPERATION menu
allows detection of malfunctioning boards.
Note
If a problem is discovered with a board, contact
Qualified Sony Service Personnel.
MENU SEL control
1
Set the VF DISP switch to MENU.
The OPERATION menu will be displayed on the
viewfinder screen.
VF DISP switch
2
Rotate the MENU SEL control to display the
DIAGNOSIS page.
<Diagnosis>
(CHU) (ADP)
ROM:1.00 ROM:1.00
VA : OK VDA: OK
MX : OK AU : OK
PR : OK DAP: OK
DL : OK
IE : OK (CCU)
ROM:1.00
3
To end menu operations, set the VF DISP switch to
ON.
Note
This page only shows a display of status, and may not
be used to change settings.

4-5-11 Setting the Camera ID

The CAMERA ID page of the OPERATION menu is
used to set the camera ID, which is a string of up to 10
alphanumeric characters, symbols, and/or spaces.
MENU SEL control
1
Set the VF DISP switch to MENU.
The OPERATION menu will be displayed on the
viewfinder screen.
Chapter 4 Adjustments and Settings for Recording
VF DISP switch
(Continued)
4-17(E)