Indicators And Messages - Kyocera FS FS-9530DN Operation Manual

Indicators and Messages

Indicators
Indicator Condition
Flashing
Lit
READY
Off
Flashing
Lit
DATA
Flashing
Lit
ATTENTION
Off
Maintenance Messages
Message
Add paper (paper
source)
Add staples
Add staples
Press GO
Call service
F###
OPERATION GUIDE
The tables on the following pages indicate how to respond to problems
indicated by the operation panel indicators and messages.
An error occurs that you can clear by yourself.
The printer is on-line. The printer is ready to print.
The printer is off-line. The printer stores but does not print received data. Also
indicates when printing is automatically stopped due to occurrence of an error.
Data transfer is taking place.
Either data is being processed, or data is being written onto the option memory
card or hard disk.
The printer needs maintenance attention or the printer is warming up (Please
wait).
A problem or an error occurs that you can clear by yourself. (For example, a
paper jam occurs.)
Operations are normal.
The following table lists maintenance messages that you can deal with by
yourself. If Call service person appears, turn off the printer,
disconnect the power cord, and contact your Kyocera Mita dealer.
The paper has run out. Supply paper according to the paper source displayed
(paper cassette, MP tray, or optional paper feeder).
Messages indicating the printer status (Ready, Please wait, Processing,
Waiting, FormFeed TimeOut, Paper loading*) are displayed alternately.
* These messages will not appear when the number of copies is set to 2 or more.
The stapler unit is not installed correctly in the document finisher. Install it
correctly.
No staples are installed in the stapler. Set it in the stapler. If you wish to continue
printing without the staple function, press [GO].
F### represents a controller error (#=0, 1, 2, ...). Call for service.
The printer does not operate when this message is displayed.
Description
Corrective Action
Troubleshooting
4-7