Data Entry Keyboard; Front Panel Leds - Honeywell TUXWIFIS Installation And Setup Manual

Front Panel LEDs

The Tuxedo keypad has three LEDs as follows:
If using Occupancy mode the LEDs are as follows:
> 
K>KZ ^d dh^
Z  KE
'Z E KE

Data Entry Keyboard

Throughout this document, the user is required to enter information on the Tuxedo Keypad (i.e.,
password, device names etc.) Use the Data Entry Keyboard to enter all required information.
• Press the "up arrow" to switch to upper case characters.
• Press the Space key to add a space between characters.
• Press the x key to delete/backspace.
• Press the ABC/123 key to switch between numerals and symbols/characters.
• Press GO to return to the previous screen.
About the System (cont'd)
K D
Z

Z

SD/SDHC CARD Slot
ARMED (RED) LED
ON – System is armed.
OFF – System is not armed.
READY (GREEN) LED
ON – System is disarmed and ready to arm.
OFF – System is armed or disarmed but not
ready. If disarmed, faults or troubles are present.
MESSAGE (YELLOW) LED
FLASHING – The system contains new
message(s) for the User.
OFF – No new messages.
RESET BUTTON
Press to reset keypad
&hEd/KE
t z E/',d
>K^ E/',d
,KD
KW E
9
6280-001-V0