Troubleshooting; Manual Test Mode; Manual Test Mode Commands - Motorola W208 Service Manual

Troubleshooting

Manual Test Mode

Manual Test Mode Commands

Table 3: Manual Test Commands
Key Sequence
#02#
#03#
#04#
#09#
**0102#
**0105#
*#06#
27
Motorola W208/W209 telephones are equipped with a manual test mode capability. This
allows service personnel to verify functionality and perform fault isolation by entering keypad
commands.
To enter the manual test command mode, a GSM/DCS/PCS test SIM must be used.
1. Press and hold
2. Remove the battery as described in the procedures.
3. Remove the customer's SIM card from the phone as described in the procedures.
4. Insert the test SIM into the SIM slot.
5. Replace the battery as described in the procedures.
6. Press and hold
Test Function/Name
Handset information
RF information
ADC information
Simple Test mode
FFS format
Disable EFEM mode
IMEI number
to turn the phone OFF.
to turn the phone ON.
Aug.15, 2006
W208/W209
Remarks