Removing and Replacing the LCD Screen
23
4.
Carefully pry off the microphone component.
Figure 17. Removing the microphone
1.
Remove the antenna module as described earlier.
2.
Gently pry the LCD screen away from the Transceiver board. Six hooks hold it in place
(three on each side).
Figure 18. Pry the LCD screen away from the Transceiver board
3.
Detach the cable connecting the LCD screen to the Transceiver board.
4.
To replace it, gently solder the cable to the Transceiver board then mount the LCD.
5.
Restore the antenna module and other parts.
Aug.15, 2006
W208/W209