NEC Xen Topaz Programming Manual page 273

IN
SA
SB
Description
There are a maximum of 300 mailboxes in the DSPDB. Use this program to set the box number and pass-
word linked to the extension number (or pilot number) for each mailbox.
Input Data
DSPDB Message Box Number
Prog. No.
40-02-01
Mailbox Number
A mailbox number should use the
same number of an extension.
40-02-02
Mailbox Password
If not required, leave this option
empty.
Conditions
None
Feature Cross Reference
♦
Voice Mail (DSPDB)
Telephone Programming Instructions
To enter data for Program 40-02 (SMDR Output Options):
1. Enter the programming mode.
2. Enter 40 02
40-02-01MgBox1
Mail box No.
3. Enter the number of the item you want to program.
40-02-xxMgBoxxxx
xxxxx
4. Select the Message Box number to be programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series' programming section.
Xen Topaz Programming Manual
Item
Up to 4 digits
Dial 4 digits Fixed
266
P 40: V
ROGRAM
40-02: M
001-300
Input Data Default
Mailbox 1 =200
Mailbox 2 = 201
Mailbox 3= 202
Mailbox 4 = 203
Mailbox 5 = 204
Mailbox 6 = 205
Mailbox 7 = 206
Mailbox 8 = 207
No setting
Program 40 to 92
M S
OICE AIL ETUP
B S
AIL OX ETUP
Related
Program