Did Trunk Group To Translation Table Assignment - NEC Xen Topaz Programming Manual

Program 21 to 25
IN
SA
22-13: DID T
SB
Description
Use Program 22-13 : DID Trunk Group to Translation Table Assignment to assign the DID Trunk
Groups to DID Translation Tables. DID trunks should be in their own group. If you have more than one type
of DID trunk, put each type in a separate Trunk Group. For each Trunk Group, you make a Translation Ta-
ble entry for each Night Service mode.
Input Data
Trunk Group Number
Day/Night
Mode
1-8
Conditions
None
Feature Cross Reference
♦
Direct Inward Dialling (DID)
Telephone Programming Instructions
To enter data for Program 22-13 (DID Trunk Group to Translation Table Assignment):
1. Enter the programming mode.
2. Enter 22 13
22-13-01TrkGrp1
Mode1 = 1
3. Enter the number of the item you want to program.
22-13-xxTrkGrpxx
xxxxx
4. Select the Trunk Group number to be programmed by pressing the FLASH or the VOLUME ▲ or
▼ VOLUME keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series' programming section.
G
RUNK
Conversion Table Area Number
0-20 (0 : No setting)
P 22: I
ROGRAM
T
ROUP TO RANSLATION
Default
1
Xen Topaz Programming Manual
C S
NCOMING ALL ETUP
T A
ABLE SSIGNMENT
1-25
Related Program
187