Table of Contents
Advertisement
For Mac OS
(continued)
■ Perform the Calibration of the camera
3) Click the SP6 Driver icon on the menu bar.
4) Select the pop-up "Calibration".
•
Manual calibration screen displays.
5) Press the target mark in the screen with the Pen.
•
Each time you press the target mark, the moving order is .
6) Press the target mark .
•
The "Please wait..." message appears, and after completing the process the message will disappear.
Note
• When the position of the screen and the projector is fixed, there is no need for calibration again next time if you use the same
computer at the same resolution.
18
: SP6 Driver icon
: Mouse icon
Tool bar
Advertisement
Table of Contents
