Table of Contents
Advertisement
OPERATING THE KVM SWITCH
SECTIONS
Table of Contents
Operation
Selecting a Computer Using Port Selectors
Now that you have connected your console and computers to the
Switch, it is ready for use . You can select which computer you wish
to control by pressing the corresponding port selector on the front of
the Switch . The LED number will illuminate to indicate which computer
(or port) is currently selected . It may take approximately 1 second for
the video signal to sync after switching ports . This is normal behavior
and is dependent on the display connected . This is normal operation
and ensures that proper synchronization is established between the
monitor and the connected computers .
Keyboard and mouse inputs can only be sent to the selected
computer, and video outputs can only be received from the selected
computer . The Switch also prevents any data transfer between
connected computers, ensuring the security of your computers .
Please note that the default port at power-up is port 1 . In case
of a power failure or if the power is cycled, the Switch will
default to port 1 .
Belkin® Secure 2/4 port DisplayPort KVM Switch User Manual
1
2
3
4
4
5
16
6
7
8
Advertisement
Table of Contents
