Introduction Congratulations Congratulations and thank you for purchasing the Belkin 2- in-1 Hub (the Hub). This new design gives you two ultrafast USB hubs in one: a stable base and a travel hub. The 3-port base can connect your larger, more stationary equipment, such as printers and hard drives.
Introduction Features • Compliant with Universal Serial Bus specification 2.0 (data rate 1.5/12/480Mbps) • Backward-compatible with Universal Serial Bus specification 1.1 (data rate 1.5/12Mbps) • Compatible with Windows® 98 SE, Me, 2000, XP, and VistaTM • Approved by USB Implementers Forum (USB-IF) •...
Installation Important Note: Please do not connect any USB devices to the Hub until instructed to do so in step 4 of this installation procedure. 1. Plug the AC adapter into a wall outlet or surge protector. Plug the DC connector into the DC power jack found on the rear of the Hub.
Page 9
PCI card vendor for an updated USB 2.0 driver. The Belkin USB 2.0 driver supports all competitive cards based on the NEC host controller with the exception of Adaptec.
FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin International, Inc., of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the product: to which this declaration relates: Complies with Part 15 of the FCC Rules. Operation is subject to the...
Page 11
(except for shipping charges for the product). What is not covered by this warranty? All above warranties are null and void if the Belkin product is not provided to Belkin for inspection upon Belkin’s request at the sole expense of the purchaser, or if Belkin determines that the Belkin product has been improperly installed, altered in any way, or tampered with.
Page 12
Information Belkin reserves the right to review the damaged Belkin product. All costs of shipping the Belkin product to Belkin for inspection shall be borne solely by the purchaser. If Belkin determines, in its sole discretion, that it is impractical...