Lamp Installation Instructions - Elation PRO FS 15R FOLLOWSPOT User Manual

L A M P I N S T A L L A T I O N I N S T R U C T I O N S
INSTALLING OR REPLACING THE LAMP
To ensure a proper/safe lamp change, carefully read all the following instructions.
LAMP RATED LIFE
Because of the nature of the extreme heat associated with the Phillips™ Platinum
15R lamp and the tight nature of the internal optical system, it is IMPERATIVE that the
lamp be replaced every 2,000 Hours. This is done to protect the internal optical
system as well as prevent accidental lamp explosion, which could lead to hot glass
particles falling from the fixture.
FAILURE TO CHANGE THE LAMP AFTER THE 2,000 HOUR RATED LIFE, MAY CAUSE
INTERNAL DAMGE TO THE FIXTURE!
LAMP SAFETY INSTRUCTIONS
• ALWAYS replace lamp every 2,000 Hours.
• Use only Genuine Original Phillips™ Platinum 15R lamps. Other brand lamps may
cause damage and void the warranty!
• NEVER touch the lamp with your bare hands, as the oil from your hands will
shorten the life of the lamp.
• Always disconnect the fixture's main power supply before replacing lamp.
• Allow fixture to cool for at least 15 minutes before attempting any type of service.
• Make sure ALL covers/panels are replaced/secured before operating the fixture
to prevent any risk and/or damage to eye retina from UV Radiation exposure!
L A M P R E P L A C E M E N T
Please note that due to the nature of the Phillips™ Platinum 15R
Lamp and the optical path of the Elation PRO FS 15R
FOLLOWSPOT fixture, the lamp MUST BE replaced at 2,000
hours. Use only Genuine Original Phillips™ Platinum 15R Lamps.
Other brand lamps may cause damage and void warranty!
w w w . e l a t i o n l i g h t i n g . c o m
11
PRO FS 15R FOLLOWSPOT™ User Manual Ver 1