Lamp Installation Instructions - Elation SNIPER 2R User Manual

L A M P I N S T A L L A T I O N I N S T R U C T I O N S
INSTALLING OR REPLACING THE LAMP
To ensure a proper/safe lamp change, carefully read all the following instructions.
LAMP SAFETY INSTRUCTIONS
• ALWAYS replace lamp after 6,000 Hours.
• Use only Genuine Original Phillips™ Platinum 2R lamps. Other brand lamps may
cause damage and void the warranty!
• NEVER touch the lamp with your bare hands, as the oil from your hands will
shorten the life of the lamp.
• Always disconnect the fixture's main power supply before replacing lamp.
• Allow fixture to cool for at least 15 minutes before attempting any type of service.
• Make sure ALL covers/panels are replaced/secured before operating the fixture
to prevent any risk and/or damage to eye retina from UV Radiation exposure!
L A M P R E P L A C E M E N T
Please note that due to the nature of the Phillips™ Platinum 2R
Lamp and the optical path of the Elation SNIPER 2R fixture, the
lamp MUST BE replaced at 6,000 hours.
Use only Genuine Original Phillips™ Platinum 2R Lamps. Other
brand lamps may cause damage and void warranty!
w w w . e l a t i o n l i g h t i n g . c o m
11
SNIPER 2R™ User Manual ver 3