Advertisement
• Terrycloth bonnets are 100% cotton and
can be machine-washed in cold water
with a small amount of detergent, then
machine-dried at low heat. However,
hand-washing and air drying is recom-
mended for longer terrycloth bonnet life.
• Wax applicator bonnets are to be used
only once, then thrown away.
• To prolong pad life and shape, always
store polisher with pad face up.
• Remove bonnet from pad when polisher
is not in use so that pad can dry out and
retain its original shape.
• Badly oxidized paint may require several
applications. DO NOT USE ABRASIVE
COMPOUNDS.
• The most common error is applying too
much wax. If pad becomes saturated, it
will not last as long, and polishing will
be more difficult and take longer.
• If applicator bonnet continually comes off
pad, you may be using too much wax.
• If buffing seems difficult, you may have
used too much wax.
• Use only mild soap and a damp sponge
to clean polisher. Do not immerse any
part in liquid. If polisher needs repair,
return it to a Sears Service Center.
• The lamb's wool bonnet is only to be
used for the final buff. Do not use it to
apply or remove wax.
• Lamb's wool bonnets can be cleaned by
hand washing in lukewarm water and
mild detergent; then machine dry at the
lowest setting.
CARE AND MAINTENANCE
CARTON CONTENTS
• Buffer/Polisher (1) 120VAC, .50 amps
• Wax Applicator Bonnet (1)
• Terrycloth Bonnet (1)
5
Advertisement
