Download Print this page

Craftsman 646.10712 Owner's Manual

Buffer/polisher system double insulated

Advertisement

Quick Links

OWNER'S
MANUAL
Model No.
646.10712
CA UTION:
Read and follow
all safety rules
and operating
instructions
before first use
of this product.
SAVE THIS MANUAL
FOR FUTURE REFERENCE
®
CRRFTSMRN®
BUFFER/POLISHER
SYSTEM
Double Insulated
• Introduction
• Operation
• Maintenance
• Repair Parts
Sears,
Roebuck
and Co., Hoffman
Estates, IL 60179 U.S.A.

Advertisement

loading

Summary of Contents for Craftsman 646.10712

  • Page 1 CRRFTSMRN® OWNER'S MANUAL BUFFER/POLISHER SYSTEM Double Insulated Model No. 646.10712 CA UTION: Read and follow all safety rules and operating instructions before first use of this product. • Introduction • Operation • Maintenance SAVE THIS MANUAL • Repair Parts FOR FUTURE REFERENCE ®...
  • Page 2: Safety Precautions

    SAFETY PRECAUTIONS DOUBLE INSULATION - SAFETY PLUS... ELECTRIC TOOLS, BASIC WARNING: WHEN USING Double insulated construction and shock proof SAFETY PRECAUTIONS, housing assure protection from electrical shock INCLUDING FOLLOWING, SHOULD ALWAYS BE FOLLOWED. TO REDUCE RISKS with an extra layer of electrical insulation plus the OF FIRE, ELECTRIC SHOCK AND PERSONAL...
  • Page 3 Terrycloth Wax Applicator 10604 10603 10609 8-oz. 10998 FULL ONE YEAR WARRANTY ON CRAFTSMAN BUFFER/POLISHER If this Craftsman Buffer/Polisher fails to give complete satisfaction within one ye&r from the date of purchase, RETURN IT TO THE NEAREST SEARS STORE THROUGHOUT THE UNITED STATES and Sears will repair it free of charge.
  • Page 4 BUFFER/POLISHER INSTRUCTIONS Before you begin, make sure your car is clean and NOTE: The Wax & Polishing Solution containers shown in the illustrations dry. The work area should be dry also. If necessary, remove road tar with a general cleaner before representative.
  • Page 5 After flat surfaces are covered with wax, do sides of the car. Hold the polisher as shown. Let the cord hang free. It is not necessary to use a criss- cross motion on doors and fenders. Remove the wax applicator bonnet and use it to hand polish all hard- to-reach...
  • Page 6: Care And Maintenance

    CARE AND MAINTENANCE OF YOUR POLISHER Terrycloth bonnets can be machine-washed in cold The most common error is applying too much water with a small amount of detergent, then wax. If pad becomes saturated, it will not last as machine-dried at medium heat.
  • Page 7: Parts List

    PARTS LIST ® 14--, PART PART DESCRIPTION QTY. DESCRIPTION QTY. 41 P26207 41P21500 Armature Housing Top 41 P25500 41P23200 Cord strain relief assy. Magnet, Yoke Assy. 41 P25009 Switch lead wire 41P23000 Motor Plate Assy. 41P16205 Cord Retainer 41P18501 Motor Bearinq 41P90100 41P16307 Guard...
  • Page 8 Forthe repairor replacement p artsyou need Call7 am- 7 pm,7 daysa week 1-800-366-PART (1-800-366-7278) For in-home major brand repair service Call 24 hours a day, 7 days a week 1-800-4-REPAIR (1-800-473-7247) For the location of a Sears Repair Service Center in your area Call 24 hours a day, 7 days a week 1-800-488-1222 For information...