Power Mode; Dc Out - Yamaha RX-V3075 Owner's Manual

❑ Target Zone
Specifies the zone with which the TRIGGER OUT jack functions are synchronized.
Settings
When "Trigger Mode" is set to "Power", electronic signal transmission
is synchronized with the power status of the main zone.
Main
When "Trigger Mode" is set to "Source", electronic signal transmission
is synchronized with the input switching in the main zone.
When "Trigger Mode" is set to "Power", electronic signal transmission
is synchronized with the power status of Zone2.
Zone2
When "Trigger Mode" is set to "Source", electronic signal transmission
is synchronized with the input switching in Zone2.
When "Trigger Mode" is set to "Power", electronic signal transmission
is synchronized with power status of Zone3.
Zone3
When "Trigger Mode" is set to "Source", electronic signal transmission
is synchronized with input switching in Zone3.
When "Trigger Mode" is set to "Power", electronic signal transmission
is synchronized with power status of Zone4.
Zone4
When "Trigger Mode" is set to "Source", electronic signal transmission
is synchronized with input switching in Zone4.
When "Trigger Mode" is set to "Power", electronic signal transmission
is synchronized with the power status of any zone.
All (default)
When "Trigger Mode" is set to "Source", electronic signal transmission
is synchronized with the input switching in any zone.
■

DC OUT

Configures the DC OUT jack setting.

❑ Power Mode

Selects how to supply power to the Yamaha AV accessory connected to the DC OUT
jack.
Settings
Supplies power through the DC OUT jack continuously regardless of
Continuous (default)
the power state (on/standby) of the unit.
Supplies power through the DC OUT jack only when the main zone is
Main Zone Power
turned on.
Sync.
(This setting may not work properly on some accessories.)
■
Memory Guard
Prevents accidental changes to the settings.
Settings
Off (default) Does not protect the settings.
On Protects the settings until "Off" is selected.
• When "Memory Guard" is set to "On", the lock icon (o) is displayed on the menu screen.
CONFIGURATIONS ➤ Configuring various functions (Setup menu)
Icon
126
En