Yamaha RX-V3075 Owner's Manual page 162

• Input Sensitivity / Input Impedance
PHONO (1 kHz, 100 W/8 ) ................................3.5 mV/47 k
AUDIO 2 etc. (1 kHz, 100 W/8 ).......................200 mV/47 k
• Maximum Input Signal
PHONO (1 kHz, 0.5% THD)............................... 60 mV or more
AUDIO 2 etc. (1 kHz, 0.5% THD) ........................ 2.4 V or more
• Output Level / Output Impedance
AV OUT ..............................................................200 mV/1.2 k
HEADPHONE OUT .............................................150 mV/100 
PRE OUT
SUBWOOFER (50 Hz) ........................................1.0 V/1.2 k
Except SUBWOOFER (1 kHz) ............................1.0 V/1.2 k
ZONE OUT.............................................................1.0 V/1.2 k
• Frequency Response
AUDIO 2 etc. (10 Hz to 100 kHz) ............................... +0/-3 dB
• RIAA Equalization Deviation
PHONO (20 Hz to 20 kHz)..........................................0±0.5 dB
• Total Harmonic Distortion
PHONO to AV OUT ..............................................0.02% or less
MULTI CH INPUT to Speaker Out (Pure Direct, 70 W, 8 )
.............................................................................0.04% or less
• Signal to Noise Ratio (IHF-A Network)
PHONO to AV OUT (Input Shorted 5 mV)
[China model] .....................................................86 dB or more
[Australia model] ................................................81 dB or more
AUDIO 2 etc. to Speaker Out (Pure Direct, Input Shorted 250 mV)
..........................................................................100 dB or more
• Residual Noise (IHF-A Network)
Front L/R (Speaker Out)......................................150 µV or less
• Channel Separation
PHONO (Input Shorted, 1 kHz/10 kHz) ... 60 dB/55 dB or more
AUDIO 2 etc. (Input 5.1 k Shorted, 1 kHz/10 kHz)
................................................................. 60 dB/45 dB or more
• Volume Control
Main Zone.................MUTE, -80 dB to +16.5 dB (0.5 dB Step)
Zone2/Zone3 ............MUTE, -80 dB to +16.5 dB (0.5 dB Step)
• Tone Control Characteristics
Main Zone
Bass Boost/Cut......................... ±6.0 dB/50 Hz (0.5 dB Step)
Bass Turnover............................................................. 350 Hz
Treble Boost/Cut ..................... ±6.0 dB/20 kHz (0.5 dB Step)
Treble Turnover...........................................................3.5 kHz
Zone2/Zone3
Bass Boost/Cut............................. ±10 dB/50 Hz (2 dB Step)
Bass Turnover............................................................. 350 Hz
Treble Boost/Cut ........................... ±10 dB/50 Hz (2 dB Step)
Treble Turnover...........................................................3.5 kHz
• Filter Characteristics
(fc=40/60/80/90/100/110/120/160/200 Hz)
H.P.F. (Front, Center, Surround, Surround Back: Small)
................................................................................. 12 dB/oct.
L.P.F. (Subwoofer)..................................................... 24 dB/oct.
Video Section
• Video Signal Type............................................................... PAL
• Video Signal Type (Video Conversion) ..................... NTSC/PAL
• Video Signal Level
Composite ............................................................. 1 Vp-p/75 
S-video
Y ......................................................................... 1 Vp-p/75 
C (PAL) ............................................................ 0.3 Vp-p/75 
Component
Y ......................................................................... 1 Vp-p/75 
Pb/Pr................................................................ 0.7 Vp-p/75 
• Video Maximum Input Level (Video Conversion Off)
.......................................................................1.5 Vp-p or more
• Signal to Noise Ratio (Video Conversion Off)..... 60 dB or more
• Monitor Out Frequency Response (Video Conversion Off)
Component (MONITOR OUT/ZONE OUT)
........................................................... 5 Hz to 100 MHz, ±3 dB
FM Section
• Tuning Range .................................. 87.50 MHz to 108.00 MHz
• 50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.)
Mono ................................................................. 3 µV (20.8 dBf)
• Signal to Noise Ratio (IHF)
Mono/Stereo.......................................................... 72 dB/70 dB
• Harmonic Distortion (IHF, 1 kHz)
Mono/Stereo.............................................................0.3%/0.5%
• Antenna Input................................................ 75  unbalanced
AM section
• Tuning Range...........................................531 kHz to 1611 kHz
General
• Power Supply
[China model] ................................................. AC 220 V, 50 Hz
[Australia model]............................................. AC 240 V, 50 Hz
• Power Consumption........................................................ 490 W
• Standby Power Consumption
HDMI Control Off, Standby Through Off ........... 0.3 W (Typical)
HDMI Control On, Standby Through On ........... 5.0 W (Typical)
HDMI Control Off, Standby Through On (AV 1, No Signals)
.......................................................................... 4.2 W (Typical)
Network Standby On......................................... 2.2 W (Typical)
• Dimensions (W x H x D)
......................435 x 182 x 465 mm (17-1/8" x 7-1/8" x 18-1/4")
* Including legs and protrusions
• Weight
[RX-V3075]
[China model] ............................................ 19.5 kg (43.0 lbs)
[Australia model]........................................ 17.8 kg (39.2 lbs)
[RX-V2075].................................................... 17.0 kg (37.5 lbs)
* Specifications are subject to change without notice.
APPENDIX ➤ Specifications
162
En