Yamaha RX-V3075 Owner's Manual page 22

1 2 3 4 5 6 7 8 9
Speaker connections
■
Connecting speakers
Connect the speakers placed in your room to the unit.
Caution
• Remove the unit's power cable from an AC wall outlet and turn off the subwoofer before connecting the
speakers.
• Ensure that the core wires of the speaker cable do not touch one another or come into contact with the
unit's metal parts. Doing so may damage the unit or the speakers. If the speaker cables short circuit,
"Check SP Wires" will appear on the front display when the unit is turned on.
Speakers to be connected
Room Speaker type Abbr.
1
Front (L)
2
Front (R)
3
Center
4
Surround (L)
5
Surround (R)
6
Main zone Surround back (L)
7
Surround back (R)
E
Front presence (L)
R
Front presence (R)
T
Rear presence (L)
Y
Rear presence (R)
If you have nine speakers, use two of them as surround back speakers (*1) or rear
presence speakers (*2). If you have seven speakers, use two of them as surround back
speakers (*3) or front presence speakers (*4). If you have five speakers, use two of
them as surround speakers (*5) or front presence speakers (*6).
• You can also connect up to 2 subwoofers (with built-in amplifier) to the unit. When using 2 subwoofers,
configure the "SWFR Layout" setting (p.113) in the "Setup" menu after connecting the power cable to an AC
wall outlet.
• To use an external power amplifier (Hi-Fi amplifier, etc.) to enhance speaker output, see "Connecting an
external power amplifier" (p.33).
Speaker system
Power Amp
(the number of channels)
Assign
(p.111)
9+2 9 7 5 2
● ● ● ● ●
● ● ● ● ●
● ● ● ●
● ● ●
*5
● ● ●
*5
●
*1 *3
Basic (default)
●
*1 *3
● ●
*4 *6
● ●
*4 *6
●
*2
●
*2
Cables necessary for connection (commercially available)
Speaker cables (x the number of speakers)
+ +
– –
Audio pin cable (two for connecting two subwoofers)
Connection diagram
Refer to the following diagram and connect the speakers to the unit.
U O 3 U O U C U
ZONE OUT/PRE OUT
CENTER
The unit (rear)
ZONE 2 / ZONE 3 /
FRONT SURROUND SUR. BACK SUBWOOFER
F.PRESENSE R.PRESENSE
SURROUND SURROUND BACK ZONE 2/ZONE 3/R.PRESENCE
R L R L
R
SINGLE
E
1
9
4
T
6
• When using only one surround back speaker, connect it to the SINGLE jack (L side).
PREPARATIONS ➤ Connecting speakers
PRE OUT
(SINGLE) (FRONT)
1
2
(REAR)
FRONT SURROUND SUR. BACK CENTER
SUBWOOFER
SPEAKERS
ZONE 2/ZONE 3/F.PRESENCE/
CENTER FRONT
BI–AMP
R L
EXTRA SP2 L EXTRA SP1
R L
R
2
3 9
5
Y
7
22
En