Error Codes - IBM 5100 Communications Manual

Error Codes
Error codes are displayed on the status line in positions 17 to 27 (general status
area), 28 to 40 (tape status area), and 41 to 51 (printer status area).
The following list provides a brief description of the error codes that are common
to communications and APL or BASIC language operations. For a complete
description of these error codes and the recovery procedure, see the 5100 APL
Reference Manual or the 5100 BASIC Reference Manual.
Code
002
003
004
005
006
007
008
009
010
011
012
013
014
050
051 to 059
Message
Command error
Status error
Time-out
Tape not inserted
File protect
CRC error
Position error
End of data-may also indicate a normal condition
End of file
End of marked file
Physical end of tape
Device not attached
Device not selected
End of forms
Pri nter errors
30
The preceding error codes are displayed in this format:
SSS: DOD
SSS is the error code and DDD is the device address:
E80
=
Built-in tape unit
E40 = Auxiliary tape unit
500
=
Printer