Getting Started; Installing The Battery; Charging The Battery - Kyocera Cyclops K325 User Manual

1 G S
ETTING

Installing the battery

Your Cyclops phone comes with a removable
lithium ion (LiIon) battery.
battery before using the phone
To install the battery:
Hold the phone
1.
face down.
Place your thumb on the
1.
ribs at the top of the
battery door and slide the
battery door downward to
remove it
Place the battery in the
2.
phone casing with the
metal contacts facing
towards the bottom end
of the phone.
Replace the battery door
3.
by sliding the notches into
the openings at the
bottom and outside edges
of the battery casing.
Slide the door up to secure the cover
4.
into place.
User Guide for the Cyclops Phone
TARTED
Fully charge the
.

Charging the battery

You must have at least a partial charge in the
battery to make or receive calls.
To charge the battery:
Connect the AC adapter to
1.
the jack on the bottom of
the phone. Do not force
the AC adapter into the
jack. Make sure the
arrow is face up
as shown.
Plug the adapter into a wall outlet.
2.
The battery icon in the upper right corner of the
screen tells you whether the phone is:
• Charging (the icon is animated)
• Partially charged
• Fully charged
The battery will not charge if you use the
Note:
phone while it is connected to an AC adapter.
You must use a Kyocera-authenticated
Note:
battery in your phone. If you attempt to use a
battery that has not been authenticated you will
receive a security warning. Contact Virgin Mobile
to obtain a Kyocera-authenticated battery.
1