Getting Started; Installing The Battery - Kyocera K323 User Manual

82-N8865-1EN.book Page 1 Friday, August 18, 2006 5:47 PM
1 G S
ETTING TARTED

Installing the battery

Your Kyocera K323 phone comes with a
removable lithium ion (LiIon) battery.
charge the battery before using the phone.
You must use a Kyocera-authenticated
Note:
battery in your phone. If you attempt to use a
battery that has not been authenticated you will
receive a security warning. Visit
www.verizonwireless.com
Kyocera-authenticated battery.
To install the battery:
Hold the phone
1.
face down.
Slide the battery door
2.
downward to remove it.
Place the battery in the
3.
phone casing with the
metal contacts facing
towards the bottom end
of the phone.
Replace the battery door
4.
by sliding the notches
into the openings at the
bottom and outside edges
of the battery casing.
Slide the door up to
5.
secure the cover
into place.
User Guide for the Kyocera K323 Phone
Charging the battery
You must have at least a partial charge in the
battery to make or receive calls.
Fully
To charge the battery:
1.
2.
to obtain a
The battery icon in the upper-right corner of the
screen tells you whether the phone is:
• Charging (the icon is animated)
• Partially charged
• Fully charged
Note:
phone while it is connected to an AC adapter.
Recharging the battery
You can safely recharge the battery at any time,
even if it has a partial charge.
Note:
is powered off.
Connect the AC adapter to
the jack on the bottom of
the phone.
Plug the adapter into a
wall outlet.
The battery will not charge if you use the
To remove the battery, make sure the phone
1