Using The Camera; Accessing Picture Mode - Kyocera Cyclops K325 User Manual

13 U
SING THE
Tips before operating your
camera
• You cannot activate the camera while
on a call.
• Once the camera is active, the main screen
acts as the viewfinder.
• If you get a "Low memory" error, check your
resolution and quality compression settings.
See "Setting up the camera" on this page.
• If there is no activity within 45 seconds after
you turn your camera on, the camera quits
and returns to the previous screen.

Accessing picture mode

Flip open
1.
Press and hold
2.
to activate picture mode.
Camera settings
Press and hold
1.
Press to select
2.
Press to select
3.
Highlight an option and press
4.
– options are Off, On, or Automatic.
Flash
48
C
AMERA
until you hear two beeps
to activate picture mode.
.
Options
.
Settings
:
– options are 640 x 480,
Resolution
320 x 240 (best for sending to email),
160 x 120 and 1280 x 1024.
– brightens the picture for
Low Light Mode
low light environments.
– options are Off (default) or 3,
Self Timer
5, or 10 second pauses. When set, the
camera beeps from 3 seconds down to the
time the shutter snaps the picture
automatically. Self Timer is not available
when mode is activated.
Multishot
– allows you to take up to six
Multishot
multiple pictures while the camera key is
pressed and held. A tone plays each time a
picture is taken. A second tone plays when
the final picture is taken.
– sets the sound used when
Shutter Sound
the camera takes a picture.
– allows the camera to adjust
White Balance
for different lighting. Options are
Automatic, Incandescent, Fluorescent,
Daylight, and Darkness.
– allows you to capture pictures
Color Tone
with different coloring. Options are
Normal, Black & White, Negative,
and Sepia.

Using the Camera