Subaru IMPREZA 2001 Service Manual page 58

FUEL PUMP
FUEL INJECTION (FUEL SYSTEMS)
B: INSTALLATION
Install in the reverse order of removal. Do the fol-
lowing:
(1) Always use new gaskets.
(2) Ensure sealing portion is free from fuel or for-
eign particles before installation.
(3) Tighten nuts in alphabetical sequence shown
in figure to specified torque.
Tightening torque:
5.9 N·m (0.6 kgf-m, 4.3 ft-lb)
S2M0063A
C: INSPECTION
Connect lead harness to connector terminal of fuel
pump and apply battery power supply to check
whether the pump operate.
WARNING:
• Wipe off the fuel completely.
• Keep battery as far apart from fuel pump as
possible.
• Be sure to turn the battery supply ON and
OFF on the battery side.
• Do not run fuel pump for a long time under
non-load condition.
G2M0366
FU(DOHC TURBO)-57