Subaru IMPREZA 2001 Service Manual page 55

FUEL INJECTION (FUEL SYSTEMS)
6) Insert fuel filler hose (A) approximately 35 to 40
mm (1.38 to 1.57 in) over the lower end of fuel filler
pipe and tighten clamp.
CAUTION:
Do not allow clips to touch air vent hose (B) and
rear suspension crossmember.
(B)
7) Insert air vent hose approximately 25 to 30 mm
(0.98 to 1.18 in) into the lower end of air vent pipe
and hold clip.
L = 27.5 ± ± ± ± 2.5 mm (1.083 ± ± ± ± 0.098 in)
(1) Hose
(2) Clip
(3) Pipe
8) Tighten bolt which holds fuel filler pipe bracket
on body.
Tightening torque:
7.4 N·m (0.75 kgf-m, 5.4 ft-lb)
FUEL FILLER PIPE
(A)
EN0548
B2M1195A
EN0547
FU(DOHC TURBO)-54
9) Tighten bolts which hold evaporation hoses onto
clip of fuel filler pipe.
10) Install fuel filler pipe protector.
11) Install rear right wheel.
12) Lower the vehicle.
13) Tighten wheel nuts.
14) Connect connector to fuel pump relay.
EN0545
EN0544
B2M1748
EN0344