FUEL INJECTION (FUEL SYSTEMS)
14.Wastegate Control Solenoid
Valve
A: REMOVAL
1) Disconnect battery ground cable.
2) Remove solenoid valve cover.
3) Disconnect connector (A) from wastegate con-
trol solenoid valve.
4) Disconnect pressure hoses (B) from wastegate
control solenoid valve.
(A)
5) Remove wastegate control solenoid valve from
bracket
WASTEGATE CONTROL SOLENOID VALVE
G6M0095
EN0828
EN0829
(B)
EN0830
FU(DOHC TURBO)-40
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
EN0830