New Holland T7030 Operator's Manual page 369

GENERAL DIMENSIONS
B. Maximum ground clearance
below front axle
C. Front track setting
D. Rear track setting
-- with flange axle
-- with 98 in. bar axle
-- with 112 in. bar axle
-- with 119 in. bar axle
E. Height to top of exhaust
F. Height to:
-- Top of cab
G. *Ground clearance below drawbar
Swinging drawbars
Tow hooks
H. Front hitch projection
Links horizontal
Links in transport position
*Ground clearance below the swinging drawbar or tow hook will be dependent on type of drawbar and tyre size.
The figures shown are for guidance only.
NOTE: If your tractor has tyres of a different size then the above dimensions will vary due to the difference in
the rolling radius and section width of the tyres fitted.
SECTION 7 - - SPECIFICATIONS
2WD
----
mm 1545 -- 2187
60.8 -- 86.3
in
All models, 1524 -- 2998 mm (60.0 -- 118.0 in.)
----
----
T7030, T7040, T7050 and T7060
4WD
Standard
All 4WD models, 613 mm (24.1 in.)
All 4WD models, 1552 -- 2269
All 4WD models, 61.1 -- 89.3
All models, 1426--2026 mm (56.1 -- 79.8 in.)
All models, 1524--2438 mm (60.0 -- 96.0 in.)
All models, 1524--2794 mm (60.0 -- 110.0 in.)
All models, 3165 mm (124.6 in.)
All models, 3065 mm (120.6 in.)
All models, 398 -- 523 mm (15.6 -- 20.5 in)
All models, 314 -- 392 mm (12.3 -- 15.4 in)
4WD models only, 855 mm (33.6 in.)
4WD models only, 415 mm (16.3 in)
4WD 4WD
Suspension SuperSteer
7--3