Page 3
Link Product / Engine Product Market Product Engine North America T7.175 AutoCommand™ F4DFE613P*B003 T7.190 AutoCommand™ North America F4DFE613N*B006 T7.210 AutoCommand™ North America F4DFE613M*B003 T7.225 AutoCommand™ North America F4DFE613K*B008 T7.175 North America F4DFE613P*B003 T7.190 North America F4DFE613N*B006 T7.210 North America F4DFE613M*B003 47936462 17/11/2015...
INTRODUCTION Safety rules PRECAUTIONARY STATEMENTS Personal Safety This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Throughout this manual , you will find the signal words DANGER, WARNING, and CAUTION followed by special instructions.
Page 11
INTRODUCTION ACCIDENT PREVENTION WARNING Avoid injury! Always do the following before lubricating, maintaining, or servicing the machine. 1. Disengage all drives. 2. Engage parking brake. 3. Lower all attachments to the ground, or raise and engage all safety locks. 4. Shut off engine. 5.
Page 12
INTRODUCTION • Brakes are inoperative when manually released for repair or maintenance purposes. Use blocks or similar devices to secure the machine in these conditions. • Only use specified towing points for towing the machine. Connect parts carefully. Make sure that all pins and/or locks are secured in position before applying traction.
Page 14
Engine - Engine and crankcase Engine - Disconnect T7.175 AutoCommand™ T7.175 T7.190 AutoCommand™ T7.190 T7.210 AutoCommand™ T7.210 Prior operation: Discharge the Air conditioning system, for further information refer to Air conditioning - Discharging (50.200) Prior operation: Drain the engine cooling system, for further information refer to Engine cooling system - Drain fluid (10.400) Prior operation: Remove the Selective Catalytic Reduction (SCR) muffler, for further information refer to Selective Catalytic Reduc- tion (SCR) muffler and catalyst - Remove (10.500)
Page 15
Engine - Engine and crankcase 2. A. Remove the transmission housing drain plug and drain the transmission oil into a suitable container. B. Install the drain plug and torque to 68 - 82 N·m (50 - 60 lb ft) BAIL07APH288AVA Vehicles with front hitch 3.
Page 16
Download the full PDF manual instantly. Our customer service e-mail: aservicemanualpdf@yahoo.com...