Receiving Data Or Faxes - Kyocera 3245 User Manual

2. Press to select Reset . This resets the timer to zero.
Timing your calls
If you want to know how long you are spending on a call, you can set your
phone to beep 10 seconds before each minute passes.
Select Menu → Settings → Sounds → Minute Alert → Enabled.
•

Receiving data or faxes

Your phone may be able to receive certain data or faxes, depending on the
system sending the information. To receive data or faxes, you must connect
the phone to a laptop or PC (see page 80), and switch the phone from
voice mode to data/fax mode.
Note: You cannot receive voice calls while the phone is in data/fax mode.
1. Select Menu → Settings → Network → Data/Fax Calls.
2. Press to select an option:
– Voice only— Allows only voice calls.
– Fax, next call— Sets the phone to fax mode for the next incoming call
or the next 10 minutes.
User Guide for the Kyocera 3245 phone 29