PRESONUS AudioBox 44VSL Quick Start Manual page 77

Owner's Manual
Acoustic Guitar
Bass Guitar (Direct and Speaker)
Point a small-diaphragm condenser microphone at
the 12th fret, approximately 8 inches away. Point a
large-diaphragm condenser microphone at the bridge
of the guitar, approximately 12 inches from the guitar.
Experiment with distances and microphone
placement. Another popular method is using an XY
microphone placement with two small-diaphragm
condenser microphones. (See drum-overheads photo
on the next page.)
Plug the electric bass guitar into a passive direct box.
Connect the instrument output from the passive
direct box to a bass amplifier. Place a dynamic
microphone an inch or two away from the speaker
and connect it to a AudioBox 22/44VSL microphone
input. Connect the line output from the passive direct
box to the other microphone input on your AudioBox.
Be sure to keep the trim level for this input very low so
as not to clip the converters. For recording, place these
signals on separate tracks. During mixing, you can
blend the direct and amplifier signal to taste. This
technique can also be used in live applications.
Tutorials 5
Microphone Types 5.1
49